Synergy Wood® Southern Pine
Prefinished tongue-and-groove wall & ceiling paneling — handcrafted in America. Southern Pine's strength, durability, and natural grain make it an exceptional choice for interior and exterior applications.
Product by Synergy Wood® · Distributed by Craftsmen Supply Center
Made for Ceilings & Walls
Synergy Wood® manufactures prefinished wood paneling for ceilings and walls used by homeowners and contractors, eliminating the unforeseen challenges of finishing wood at the jobsite. Our products create a warm and inviting space for our customers to enjoy for years to come.
Available Colors
Eight artisan stain colors — each board shows natural variation. Click a color to see sample boards.
Auburn
Natural wood variation is inherent to every board. The color sample shown represents the typical appearance of this finish on Southern Yellow Pine.
- Species
- Southern Yellow Pine (SYP)
- Grade
- #2 Grade and C-Grade available
- Profile
- V-Joint and Nickel-Joint tongue & groove
- Face Width
- 5" (+/- 1/16")
- End-Matched
- Yes — end-matched tongue & groove
- Packaging
- 4-piece bundles
- Finish
- Water-based, zero VOC
Product Specs
| Species | Southern Yellow Pine |
|---|---|
| Profile | Tongue & Groove, End-Matched |
| Joint Pattern | V-Joint and Nickel-Joint |
| Face Width | 5" (+/- 1/16") |
| Grade | #2 Grade and C-Grade |
| Finish | Water-based, zero VOC prefinished |
| Colors | 8 artisan colors |
| Packaging | 4-piece bundles |
| Applications | Interior ceilings, walls, exterior soffits & porches |
| Origin | Proudly made in America |
Key Features
- No Finishing Required
Ready to install out of the box — no sanding, staining, or sealing at the jobsite.
- Zero VOC Finish
Water-based finish with no volatile organic compounds — safe for indoor air quality.
- Tongue & Groove, End-Matched
End-matched profiles allow installation to begin or end at any point along the wall.
- Low Waste
End-matching minimizes cutoff waste and makes material calculations straightforward.
- 8 Artisan Colors
Auburn, Bordeaux, Clear, Colonial, Ebony, Honey, Mocha, Weathered Grey.
- Made in America
Handcrafted at Synergy Wood's facility in Sanford, FL.
Project Gallery
Real-world installations by contractors and homeowners across Florida and beyond. Filter by color to explore.
Images courtesy of Synergy Wood® — used with attribution.
Installation Guide
Southern Pine tongue-and-groove planks are designed for straightforward installation by both homeowners and professional contractors. The end-matched profile allows cuts at any point along the board without exposing raw ends.
Synergy Wood recommends using WiseSeal End Grain Sealer by DeckWise for all cut ends to protect against checking, cracking, or swelling after installation.
Quick Tips
- Acclimate boards to the installation environment for 48–72 hours.
- Install over solid backing or directly to ceiling joists/wall studs.
- Face nail or blind nail through the tongue for a clean look.
- Apply WiseSeal to all cut ends before fastening.
- Leave a small expansion gap at walls and transitions.
- No painting or staining required — product is ready to install.
Ready to order?
Contact our yard for current pricing and availability. We carry Synergy Wood Southern Pine at our Tampa location.
Mon–Sat: 9am–4pm · 1605 N. 23rd St, Tampa, FL 33605